How to Use the

                                    HP ScanJet Slide Adapter

        The HP ScanJet Slide Adapter adds to the versatility of your HP ScanJet scanner by giving you the
        ability to scan 35-mm slides.  Easy to use, the adapter is particularly suitable for creating images
        that will be displayed on computer screens, desktop printers, or used as placeholders for final pro-
        duction images.  To use the HP ScanJet Slide Adapter:

        1. Liftthescanner'scoverandpositiontheHPScanJetSlideAdapterintheupperrightcorner,as
             shown in Figure 1. Positioned correctly, the triangle on the adapter should be aligned with the
             triangle in the Document Reference Corner.

                                ,Notched
                                      n
                                                             Top Reference
                                                             Edge                            Document
                                                                                             Reference Corner







                                    Document
                                    Reference Corner                                        ScanJet
                                                                                        Slide Adapter

             Figure 1 - Slide Positioning                  Figure 2 - HP ScanJet Slide Adapter
                                                                      Positioning


        2.   Tip the HP ScanJet Slide Adapter toward the document cover and place the top edge of a
             35-mm slide squarely against the Top Reference Edge, centered horizontally in the notch of the
             HP ScanJet Slide Adapter, as shown in Figure 1. The slide's viewing side should face
             downward, as when scanning a printed picture. (The viewing side's frame may bear a title or
             slide number.)

        3.   Lower the adapter onto the glass surface, as shown in Figure 2.

        4.   You are ready to scan! Use the HP DeskScan 11 software to scan the slide as if it were a printed
             photograph.  All of the software controls such as scaling, automatic exposure, emphasis, and
             color adjustment will work as with any other type of scanning.  As an example, for a color slide:

             a. Start your DeskScan software.

             b. For a color slide, set the Image Type to Sharp Millions of Colors.

             c. Set the Path to the desired output (normally, your printer designation).

             d. Click on Preview.

             e. Two images of the slide will appear; one will be much sharper than the other. Select the
                portion of the sharper image that you want to reproduce and click on Zoom.