f.  Only the part of the image that you selected has been scanned. Crop the image again,
                 including only the desired image; exclude all of the white border.
             g.  With the image selected, click on the automatic contrast button:     Al
             h.  Re-crop the image area, if desired, and click on FinaL Select a directory path, file name,
                 and click on Save. (Refer to the HP DeskScan // User's Guide for additional features to
                 enhance scanned images.)

          ff you have problems...

          0  If one edge of the scanned image is black or if the whole image is black, ensure that the
             HP ScanJet Slide Adapter is properly positioned on the scanner glass.  The slide must be cen-
             tered under the notched section of the adapter.  See Figure 1.
          0  If portions of the scanned image are fuzzy or blurred, ensure that the glass scanning bed and
             the surface of the slide are clean.  For instructions on cleaning the scanning bed, refer to your
             scanner's installation guide.  If the surface of the slide is dirty, consult a photo lab for cleaning
             instructions.
          0  Make sure that your slide and the reflector in the adapter are clean and free of dust. You can
             clean the inside and outside of the HP ScanJet Slide Adapter when necessary.  To clean your
             adapter reflector, use a dry, clean, soft, 1 00% cotton cloth.  Wipe the polished, interior surfaces
             gently Do not use cleaning solutions.  For best results, do not touch the reflective surface.  Store
             your adapter with the open side down.

          Notes:

          Product support: The HP ScanJet Slide Adapter is supported only with Hewlett-Packard ScanJet
          6000 series scanners.  The HP ScanJet Slide Adapter is covered by U.S. patent no. 5,463,217.

          Scanning Transparencies?  For greater flexibility and higher quality results, ask your reseller for
          information about the HP ScanJet Transparency Adapter.  This product connects to your
          HP ScanJet scanner and can illuminate transparencies up to 8.5 x 11.7 inches (216 x 297 mm).